Tips For Using Pressure Washing

Pressure washing is the process where we take a high level of water, sand or air and clean an area of dirt and debris that can’t be done by hand.  Many businesses will use commercial pressure washing services st. paul before opening a business, starting a season or more.  When it comes to pressure washing, the process when done correctly can make your space look brand new.

Start high and work down

Just like any cleaning job you want to start up high and work your way down.  You want to start by hitting overhangs and hard to reach places.  These areas of a building are great hiding spaces for dirt as well as insects and birds making nests.  If we are able to clean these areas out then we are removing these animals from making damage.

When working from the top down, we are also allowing dirt to flow down to the ground.  This will ensure that everything that we do will remain clean.  If we start from the bottom and work our way up, then we are just going to have to rewash the areas below again.

Go slow

Pressure washing isn’t a race.  You want to take your time and go slow.  You want to start with a little pressure and see how your surfaces react.  If you are not getting the results that you need, then increasing the pressure slightly will allow us to determine where we are.

commercial pressure washing services st. paul

Stand away from your surface

When cleaning a surface, you might feel that you need to be right on top of it.  This is not the case.  When cleaning surfaces you want to be far enough away that the pressure will do the work for you.  If you are too close, then you are not giving the pressure enough time to touch the area. 

Use the right chemicals

Finally, you want to use the right chemicals for the job.  On wood you will use different soaps than you will on concrete.  Also, make sure that you follow the directions to ensure that nothing is damaged in the pressure washing process.